|
Trail Duty Hummer H3 Front Leveling Kit
Hummer H3 & H3T
If you have leveled the front end of your Hummer H3 by adjusting the torsion bars, you may well notice that you suffer from front end dive when braking and excessive suspension movement. The factory shock absorbers will also be prone to bottoming out as they will now be too short.
The Trail Duty Hummer H3 Front Leveling Kit includes extended length Bilstein 5100 series shock absorbers and Trail Duty extended Bump Stops.
The Bilstein front shocks offer you the travel needed when you level out your Hummer H3, enabling you to maintain a good ride.
The Trail Duty Extended Bump Stops, available in two sizes, +1/2" and +1", will help prevent nose dive and reduce excessive suspension movement.
The stock torsion keys have enough adjustment to get the height needed to level the vehicle. Just crank up the stock keys & replace the stock front shocks and bump stops with this Trail Duty upgrade.
Includes:
* Two Extended Bump Stops
* Two Bilstein 5100 Series Shock Absorbers
Important: The best way to assess which bump stop size is suitable for your vehicle is to measure the distance between the existing bump stop and the lower a-arm, (after adjusting the torsion bars). Ideally you want the new bump stops to have small gap, 1/8" - 1/4". It is important the new bump stops are not resting on the a-arm or supporting the vehicle weight.
The +1/2" bump stops are recommended for most applications. +1" bump stops are not recommended for off-road use.
| Available Options: |
| Length: |
|
|
JEEP
Air Intakes
